Multi-Functional Corn, Sorghum, Soybean, Grain Thresher/Sheller are now widely used in agricultural production, because the equipment is not only widely used but also used by a wide range of users, because of its unique advantages. So how much do you know about some of the work processes of this device?
The crop that was cut during use of the device stood upright on the cutter plane, and the conveyor was placed on the outside of the conveyor and laid into strips. There are two types of side placement and rear placement: the side placement type harvester consists of a divider and a Hexing star wheel, a cutter, and a horizontal vertical belt conveyor. The cut crops are dialed to the upper and lower tooth belts of the conveyor, and the conveyor transports them laterally to the side of the machine for placement. The rear laying type harvester adds a set of dialing belts, star wheels and pressing elastic strips with teeth on each 30 cm between the two parts so that the straws maintain a stable upright state during the horizontal conveying process. After the right side of the machine is transported backward by a pair of longitudinal conveyor belts, the straws are laid in the back of the machine under the cooperation of the pressure plate. In the case of interplanting corn, this type of machine does not press the straw on the corn seedlings, and the cutting width is equal to the width of the heat between the two rows of corn. The vertical header harvester is compact in structure, small in longitudinal size, light and flexible, and has good maneuverability. It is suitable for harvesting rice and wheat on small plots. More than 7~9 kW walking tractor or 15 kW wheel tractor, cutting width 1.1~1.2 m; and small self-propelled harvester with 2~3 kW hand-held special chassis, cutting width 1 Around the meter.