The Model 125 Large Rice and Wheat Thresher are produced by professional manufacturer Aike, which can be used to thresh single plants and single ears of rice, wheat, soybeans, and other grains. It is also possible to lift the separation screen and use it as a cleaning machine. The instrument is easy to clean, the dead angle is easy to clean, and there is no confusion. So how do you repair if the user encounters problems with the equipment while using the thresher? Next, the Model 125 Large Rice and Wheat Thresher Manufacturers will introduce the maintenance work of the equipment.
Maintenance of Model 125 Large Rice and Wheat Thresher Manufacturers:
(1) After the threshing is finished, the dust and debris in the machine should be carefully removed; paint should be repainted as required during the use of the paint.
(2) The parts of the desoldering and cracking shall be welded.
(3) Install the thread. Note that the small head should be oriented in the feeding direction. The grain direction of the adjacent two bars should be opposite to prevent the grain from moving to one end of the drum, resulting in uneven load.
(4) Tighten the stud bolts to the specified torque. Generally, it is tightened 3-4 times; check whether each bolt has a lock nut. Because the threading machine works, the roller is running at a high speed, the nut is easy to lose, and the quality of the rod must meet the requirements. It cannot be replaced by other bolts.
(5) After the repair of the thresher drum, static balance adjustment should be done until the balance is adjusted.
(6) Check if the thruster guard cover is firm and replace it if it is damaged.
(7) Complete maintenance, fill a sufficient amount of lubricating oil to each oil filling point and lubrication point, and apply oil and rust on the threads of each adjusting screw; place the thresher in a dry and ventilated shed, taking care not to be in the thresher Put things on top to prevent deformation.