Motor installation and milling equipment Rice milling machine is mainly composed of rice machine, motor, and frame. The rice machine is mainly composed of a cover, middle seat, machine base, rice roller, rice sieve, rice knife, feed hopper, and slip. Screen, pulley and adjusting device. The rice milling part of the machine can process rice into the rice at one time, and at the same time complete the separation of rice, alfalfa, and broken rice. However, the water content and impurities of the processed material will directly affect the quality of the rice and the machine, the load, and other effects will lead to the contrary to the intended use of the machine. Today, theElectric Motor mounted Rice milling equipment paddy milling machine for sale manufacturer to introduce the operation method of the equipment.
1. Operation method: Before starting the machine, carefully check whether the fasteners in all parts of the machine are loose, and open the cover to check whether the gap of the rice roller is correct. The gap between the general rice knife and the tip of the rice roller is about 3 mm at the beginning of the rib and about 2.5 mm at the end of the rib.
2. Close the switch and run idle for 1-3 minutes. If the operation is normal, it can be processed. When opening the feed insert, it should be slowly pulled open, so that the machine gradually increases the load, otherwise it will suddenly increase, which may cause the machine to block the car. 3, stop midway, should first close the feed port, let the milled rice room mill finished and then stop. Product name: New 80 single meter machine model 6N-80 with power 2.2KW rate age; 150Kg/h machine weight 35KG size 560times; 340times; 460mm outer packaging carton features compact and reasonable structure, flexible operation, high efficiency of processing millet The energy consumption is low and the rice quality is superior to other mill processing machines.