Harvesting peanuts with a peanut harvester can greatly improve work efficiency and directly reduce costs. It is currently a harvesting mode widely used in most regions. When using peanut harvesters, we should pay attention to the following points. Next, the Tractor With Multi-function Peanut Harvester manufacturer summarized the following points and hoped to help everyone.
Operating conditions and specifications for Tractor With Multi-function Peanut Harvester:
First, peanut harvester operating conditions
1. Planting mode specification. The planting mode is ridge making, one ridge and two rows, the ridge distance is 25~28cm, the ridge distance is 55±5cm, and the flat peanut spacing is 25~28cm.
2. The seedlings have no lodging. Peanut varieties should be cultivar with erect strains, concentrated results, long harvest period and high fruit stalk strength.
3. Harvest at the right time. When the plant is aging, the top stops growing, the upper leaves turn yellow, and the base and middle leaves fall off. When most of the pods are ripe, it indicates that the peanuts have reached the harvesting stage. From the temperature point of view, when the temperature is below 12 ° C, the pod stops growing and should be harvested in time. Be sure to harvest at the right time and avoid early harvest.
4. The soil and water content are suitable. Sandy soil and sandy loam are suitable for peanut mechanization combined harvesting operation, and the soil moisture content during operation is 8%-18%.
Second, peanut harvester operation specification
1. Staffing. Tractor and multi-purpose peanut harvesting unit are generally equipped with 2 to 3 people, including 1 driver, 1 to 2 dispatching command and auxiliary personnel.
2. Preparation of the plot. Before the operation, pad the ground ditches, check the obstacles in the field and mark them. Clean up the ground floor, and clean the ground turning section of the unit in advance according to the characteristics of the machine and the condition of the land. Choose the appropriate route based on plot size and field conditions.
3. Machine preparation. Before the operation, the unit shall be fully maintained, inspected and adjusted according to the requirements of the instruction manual, and all loose bolts shall be tightened to ensure that the unit of the combined harvesting operation is in good condition and meets the technical requirements of the working tools. Prepare random consumables and adjustment and repair tools.
4. Driver requirements. The driver should be skilled and master the working principle, adjustment, use and general troubleshooting of the tractor and multi-purpose peanut harvester, and have the corresponding driver's license and operation certificate.