The qualified suspension type assembled floor is bright and stable, full of luster, and the beautiful color (such as: bright red and yellow) is slightly transparent. The material (PP) is filled with no impurities and feels very good. Unqualified wholesale interlocking multi-use basketball court is gray, dull, and there are fine white particles in the visible material. Since each manufacturer has its own raw materials and formulations, the detailed weight cannot be quantified. However, there are many unscrupulous traders and manufacturers on the market. In order to reduce the production cost, many talc (talc) is added to the polypropylene PP during processing, which makes the performance of the assembled suspended floor greatly reduced and the service life is reduced. . If you hold a piece of suspended assembled floor and feel heavy on your hand, you can conclude that the floor is a certain amount of talc (talc).

SC-ZSfloor has compiled three simplest and most effective methods to quickly identify the quality and quality of suspended assembled flooring:

1. Appearance: The surface of the suspended assembled floor has no cracks, blistering, poor plasticization, no burr on the front of the floor, and the thickness of the opposite side of the floor is uneven. The ribs are well-proportioned. The data (PP) is filled evenly, and there are no small holes in the appearance.

2. Weight: The main material of the wholesale portable futsal court is pure PP, supplemented by other additives (color masterbatch, anti-aging, reinforced PP strength data, flame retardant, etc.). Too heavy or too light is not good, it should be moderate. If it is too light, the material is not enough and the board is thin. It is possible to add talcum powder to too heavy hands.

3, color: color master color is the key, with a good color master with the average color, faded slowly and evenly, will not form part of the fading or severe fading.

The content is simply shared here. If you have any questions or inquiries, you can contact SC-ZSfloor customer service or leave a message. We will respond within the first time after receiving the information.
Need to pay attention to the reason why the sports floor has foaming and curling

There are three main reasons for the blistering and curling of the floor:

Reason 1. It is the problem of the material of the floor itself;

Reason 2. It is caused by improper construction process;

Reason 3. It may be that the adhesive is wrongly selected;

Some floors may be produced with less strict control and the wholesale removable grass protection tiles size change rate is too large. Subject to thermal expansion and contraction. There is also the fact that when the construction is not rolled, the glue misses the best opening time and loses the adhesion. After the sheet is finished, the main problem is the warping. Of course, it has a certain relationship with the objective factors. SC-ZSfloor The floor had encountered such a construction site when he was on a business trip to Qinhuangdao in December last year. At that time, the owner chose a sheet of 457mm*457mm*2mm. After the laying, a lot of curling edges appeared in a few days. It was very ugly and the repairing difficulty was very difficult. After the big, I learned that the local temperature had reached minus 20 degrees, and the windows and doors were not installed. When I saw this bad weather, I was speechless, so I must let the indoor temperature reach 15 degrees Celsius - 20 degrees Celsius during construction.

The main problem of coiling is the blistering. When the whole floor is covered on the ground, the air is generated inside the paving. If it is not removed in time, it is difficult to repair. Adhesives are also on the one hand. The auxiliary glues are generally divided into two types, one is filler glue, the second is non-filling glue, the technical term is pressure sensitive adhesive, the former has less scratching area, but the viscosity is excellent. The latter has almost the same area as the former, which is suitable for sticking 2mm quartz floor or homogenous pericardial sheet floor in summer. In order to save the cost of accessories, some merchants use pressure-sensitive adhesive to directly stick to the coiled floor. The consequences can be imagined. The foaming and curling is also common, so a good product and a reliable installation team with construction technology. The supporting construction materials can reduce the quality problems to a certain extent.