TSFQ-1600A paper slitter rewinder machine is a kind of equipment used for paper, mica tape, and film. Its purpose is to rewind the paper roll (called the base paper roll) produced by the paper machine in turn, and the paper is made into the finished paper that leaves the factory.
The paper roll rolled by the
TSFQ-1600A paper slitter rewinder machine is relatively soft, the inner side may be damaged or broken, the edges on both sides are not neat, and the width of the paper cannot be directly used in paper processing or printing machines. Various types (newsprint, letterpress printing paper, wrapping paper, etc.) need to be trimmed, slit, spliced by the rewinder, and re-rolled on the core of the paper roll to form the finished paper roll with corresponding specifications and corresponding tightness requirements before leaving the factory.

Here are some common faults of the TSFQ-1600A paper slitter rewinder machine introduced by Henan YZH Machine Co., Ltd:
1. Equipment winding is uneven
Most of this is because the paper core is not suitable, the paper core with the specified inner diameter needs to be replaced, and the winding pressure roller is used during the winding process, which can also avoid uneven winding of the equipment.
2. Wrinkling of raw materials
The key is that if the winding tension is wrong, adjust the appropriate winding tension of the equipment, apply a pressure roller for winding and wrap the slitting material on the pressure roller before entering the winding paper core.
3. Meter counting error
For this kind of problem, the two wheels of the meter wheel should touch the feeding glue stick together, and make a mark on the meter wheel with a hand-cranked 5 circles to calculate 1 meter, otherwise, the meter wheel should be replaced.