The paper cup material produced by the ZBNB-D Automatic paper cup handle machine consists of paper cup base paper direct printing, die-cutting, forming processing, and spraying food wax on the surface. The production process of the ZBNB-D Automatic paper cup handle machine is that the paper cup base paper is coated into paper cup paper, printed, die-cut, and formed. Paper cup base paper is composed of plant fibers. The production process generally uses coniferous wood, broad-leaved wood, and other plant fibers to pass through the pulp board after pulping, then disperse, refine, add chemical auxiliary materials, screen, and paper machine. The paper cup of the ZBNB-D Automatic paper cup handle machine is composed of paper cup base paper and plastic resin particles extruded and composited. Plastic resin generally uses polyethylene resin (PE). The paper cup base paper is coated with single-sided PE film or double-sided PE film to become single PE paper cup or double PE paper cup.

Preparations for Automatic paper cup handle machine production
1. After the preparation work is completed, when the motor is about to be started, it is necessary to shout "start-up" and the motor can only be started when there is no response. (This is to prevent the operator from seeing and causing unnecessary safety accidents when the mechanic is repairing on the opposite side or behind the machine).
3. Check the bonding effect of the bonding place, whether there is any indirect defect, the bonding firmness of the bottom of the cup and whether the bonding is suitable for tearing and fluffing. allow.
4. During normal operation of the ZBNB-D Automatic paper cup handle machine, if you find or feel that there is something abnormal about the machine, you should lift the cup body away first, and then stop the machine for inspection after the last cup has been knurled.
5. When restarting the machine after an unexpected shutdown for a long period of time, take out the fourth and fifth disks and check whether the knurled parts are bonded.
6. The operator of the ZBNB-D Automatic paper cup handle machine pays attention to the shape of the cup mouth, cup body, and cup bottom at any time during normal production, and checks the adhesion, size, and appearance of the cups from time to time or checks one by one.
7. When the staff concentrates on the operation, if there is an abnormal sound or the bottom of the cup is not well-formed, they should stop the machine immediately for inspection to prevent greater losses.
8. The operator must be serious and responsible in the production process and test the cups produced by himself with boiling water once an hour, 8 cups each time.
9. Before the operator seals the carton, the number of small packages should be randomly checked. After the random inspection is correct, cut out the product certificate or product pattern and paste it on the upper right corner of the left side of the carton, and fill in the job number and production date in the box. Finally, the boxes are sealed and stacked neatly in designated locations.