When the user uses the green cutting disc , it is the same as other cutting pieces such as 115 * 1 * 22 cutting disc . In order to use the product for a longer period of time, pay attention to some precautions for use. The precautions for storage and use of the green cutting disc are as follows:
1. Care must be taken when handling the cutting piece to prevent collision and cracking!
2. When the cutting piece is stored, it should be moisture-proof, anti-freeze and anti-deformation. The cutting piece should be mounted on the wooden pallet or wooden frame. The stacking height should not exceed 1.5 meters!
3. The storage time of the green cutting piece is one year. If the time exceeds the time, the rotation test should be carried out again.
4. When the cutting piece is installed on the angle grinder, the flange surface that is in contact with the cutting piece is required to be clean and flat. When tightening the cutting piece, it is required to be tightly elastic. Only special wrench reinforcement is allowed. It is forbidden to use supplementary jig (such as lengthening wrench). To prevent human damage to the abrasive tools!
5. The cutting speed of the cutting piece should not exceed the working line speed specified by the trademark of the cutting piece. When using the pneumatic grinding machine, it is necessary to prevent the air pressure from being unstable, resulting in the cutting piece exceeding the speed!
6. When using the cutting piece, it is necessary to make a sudden force. If the force is too strong, it will easily stop, jam and crush the cutting piece. If it is stuck, the cutting piece should be lifted immediately to avoid the burning piece or the broken piece!
7. The cutting piece can only be used for single piece installation. It is strictly forbidden to install two or more pieces at the same time!
8, the cutting piece is only allowed for cutting, not allowed for grinding!
9. The equipment used for cutting sheets should meet the safety regulations of GB4674 grinding machinery!
10, the user is using the cutting piece should comply with the GB2494 abrasive safety rules!