The difference between the [url= https://www.auroraabrasive.com/115-mm-go...r-cutting-disc/]4 1/2 super thin cutting disc [/url] and the grinding piece is the mesh number and shape of the abrasive. The grinding piece is more than 60 mesh, and the grinding piece is thicker than 2 mm. The quality depends mainly on the material of the abrasive.
First of all, the cutting piece and the angle grinding piece are used on the angle grinder, but due to different work performance requirements, it is divided into an angle grinding piece and a cutting piece. These two types of grinding discs can be distinguished from two aspects.
First, the use is different. The grinding disc is used for grinding. For example, the burr on the surface of the workpiece needs to be ground, and the welding surface of the workpiece needs to be ground. At this time, the angle grinder is equipped with a grinding disc, the burr is worn away, and the welding is performed. The tumor is flattened; the cutting piece is used for cutting. For example, if you want to cut a 2 meter long channel into two sections, you need to use a cutting piece.
Second, the thickness is different. The thickness of the grinding piece is thin, the cutting piece is thin, the thickness of the cutting piece with a diameter of 100 is about 1 mm, and the thickness of the grinding piece with a diameter of 100 is more than 10 mm. The thin cutting piece can be used to waste material and the resistance is small when cutting. If you use it to grind it, the side will be stressed. If you grind it, you will be able to withstand the large lateral force. With it, it will not move.