1. Good uniformity appearance and no crack shape are the basic appearances of high-quality 125*1*22 EN12413 cutting disc.
2, excellent packaging and printing anti-counterfeiting barcode is the difference between the factory products and counterfeit goods;
3. The lower the static unbalance value of any cutting piece, the better, of course, the greater the difficulty of production;
4. The general rule of cutting and grinding is that the amount of iron to be removed is small, the wear is low, the grinding wheel is too hard, the amount of iron to be removed is too large, the material is too poor, the quality of the inner quality is as little as possible, and the maximum amount of iron is removed. At the same time feel good;
5. For carbon steel, alloy steel, cast steel, stainless steel, copper and aluminum, glass stone, because their tissue density and heat status are different, it also determines the difference when choosing the cutting piece; for the glass stone, the market There are special glass stone cutting and polishing tools; copper aluminum and stainless steel solid materials are used for cutting or grinding sheets with lower thickness or zirconium corundum as the base material; hardness is required for cutting carbon steel and stainless steel profiles (non-solid) Higher grinding wheels will greatly improve the life; but for solid round steel and forgings, the grinding wheel should not be too high in hardness, otherwise it will not move!
6. If you have a large amount of cutting discs, you can't have the aluminum flat cutting disc on the market. Please contact us and ask for the specific conditions. We can provide you with the lowest possible use. Cost cutting piece.
Cutting sheet storage and handling knowledge
1. It must be completely packaged and transported to avoid collisions. It should not be exposed to moisture for a long time, and it should not be in contact with alkalis;
2, stacked in a flat manner, can not be placed and pressed for a long time to prevent deformation;
3, to avoid direct contact with the ground, must be stacked with a moisture-proof wooden pallet, the height of the ground is 10-15cm, the stacking height is not more than 1 meter;
4. Implement advanced first-use principles to ensure the best use period of products;
5, the product should be re-tested for the strength and appearance of the rotation for more than one year.