Some users who have used peanut thresher and dusting and shelling machine have a certain understanding of the equipment. How much do you know about the threshing machine drum of this equipment? Today, Wholesale Peanut Thresher with Dust Removal Sheller manufacturers to tell everyone about the roller of the peanut peeling machine?
The peeling roller of the peanut peeling machine adopts a conical open structure.
It is mainly composed of a roller shaft, a roller bracket, a rack, a claw, and a sleeve. The roller bracket consists of a hub, a spoke, and a rim. The hub is a casting. The strip is made of 16 round steel.
When casting the hub, one end of the strip is cast directly onto the hub, and the other end of the strip is welded to a rim made of flat steel. It requires firm casting and uniform welding.
The rack is made of flat steel and has an effective length of 922 mm. Picking the claws with coffee 14 round steel, a total of 30, of which 6 are long. The short tooth length is 70 mm and the long tooth length is 85 mm. They are fastened to the 6 racks with nuts. The long teeth are one for each rack and are arranged in a spiral.
Or use a hot riveting method to rive the teeth on the rack. The rack is coupled to the fixing of the three roller brackets by bolts. The roller brackets are respectively fixed to the drum shaft by a top wire. When installing, it should be noted that the six toothed rods of the small end of the fruit picking roller should be kept in the same plane and should not be rubbed against the protective cover. There should be a certain gap, but the gap should not exceed 5 mm.