In order to ensure that the Fodder Silage Cutter can have a good performance during the harvest season, the product should be properly maintained and maintained. When using the Fodder Silage Cutter, it is necessary to remove the crops in the machine in time and lubricate the mechanical parts of each machine, so that the Crop Straw Crusher can be protected from the troubles during use.

Animal Fodder Silage Cutter Crop Straw Crusher Supplier to everyone to summarize the silage cutting machine maintenance and maintenance work.
Crop Straw Crusher maintenance and maintenance:
1. Lubrication and maintenance:
Always check the quality of the green reserve mower lubricating oil and the amount of oil. Clean grease should be used, and the filter element of the oil filter should be cleaned regularly. No debris is allowed to fall into the oil and the grease is used. The use of butter is also used. Care should be taken to recommend a high-quality calcium based grease that meets the criteria.
2. Machine maintenance
Because the working environment of the crop straw crusher is relatively harsh, it is used outdoors. The working environment has a lot of dust, sediment, sewage, etc. In order to ensure that the green storage mower body does not rust, it must be cleaned frequently. In severe cases, paint can be used for secondary painting.
3. Cylinder maintenance
When the engine is running, the cylinder takes in 2 to 4 cubic meters of air per minute. In order to ensure that the air entering the cylinder is clean, the green filter air filter must be inspected and cleaned regularly.
The above information is about the maintenance and maintenance methods of the crop straw crusher when it is used. I hope it will help everyone.