#1

Disadvantages of PVC plastic floor construction in low temperature environment:

in Powerkiting - Unna 23.04.2019 09:49
von xzbbvfvbh • 110 Beiträge

1. The ground is damp and the drying is insufficient;

2, the ground temperature is low, the prefabricated interlocking running track decoration materials and the ground are difficult to fully paste;

3. Due to the influence of temperature, the curing speed of the adhesive is slow. In order to prevent peeling, the pressure roller must be repeatedly pressed.

4. Even if the PVC plastic floor is constructed, it will be hardened and softened due to the temperature difference at night or other temperature difference.

The following measures should be taken for the construction of PVC plastic floor under low temperature conditions:

1, first measure the ground temperature of the construction site, sc-zsfloor sports floor manufacturers, if less than 10 ° C, never construction;

2. 12 hours before and after construction, take necessary measures to keep the indoor temperature above 10 °C;

3. If it is applied on the cement floor, it is necessary to check whether the ground is dry enough (requires moisture content less than 4.5%).

4. The strength of the cement will be greatly reduced after the construction, so the procurement futsal court should be tested for sufficient hardness;

5. The temperature near the entrance and exit and the door and window is relatively low. It is necessary to check in advance whether the minimum temperature requirement is reached. Floor construction with poor insulation measures should be avoided as much as possible.

In winter, the PVC plastic floor drying period is about 2-3 times later than the summer (at least 3-4 weeks of additional drying period); even if the surface seems to have dried out, the sc-zsfloor sports floor manufacturer, but the inner part of the decorative material There may still be no complete drying, and there is a danger of re-flow after construction;

6. Store the adhesive and floor decoration materials in a warm place before construction, which can restore the elasticity of the packaging indentation of the floor decoration material, which is also beneficial for the relaxation of the adhesive construction performance.
Europe and the United States have a high degree of recognition. Although the suspension of assembled flooring is good in foreign countries, the application is common, but it is constantly tepid in the country and the market acceptance is low. The market development of suspended assembled flooring in China has been behind for more than a decade in developed countries. The most important reason is the "prejudice" of domestic consumers on the assembled floor. In the 1980s and 1990s, suspended flooring was presented in the field of vision with new ground materials. It was labeled as "high price" and was not known and used by no one around. In addition, the domestic consumption of removable synthesis prefabricated interlocking running track enterprises in the market, the backward form of marketing, the formation of this situation.
Suspended assembling sports flooring is getting more and more popular in Europe and America. 100% of China's plastic products are exported to Europe and America, and the annual growth rate is 30%. Although the market in foreign markets is increasingly recognized for suspended assembled flooring, the domestic market is still an uncut cake. As people's awareness of environmental protection continues to increase, the suspended assembled floor has become a "black horse". Rapid rise! In the next 5 to 10 years, the suspended assembled floor will definitely have great potential in China, and there is a big market!

nach oben springen


Besucher
0 Mitglieder und 155 Gäste sind Online

Wir begrüßen unser neuestes Mitglied: gjsohcat
Forum Statistiken
Das Forum hat 2191 Themen und 2292 Beiträge.



Xobor Einfach ein eigenes Xobor Forum erstellen