There may be some problems during the operation of the Bauxite Crushers Used In Indian Mines , because there will always be major or minor faults when the machine is running for a long time. The breakage of the main shaft is a common problem that will seriously affect the normal operation of the crusher. Let's take a look at some of the causes of spindle breakage and protective measures.

1, the reason of the device itself
During the equipment manufacturing process, there may be some small problems that cause various problems with the spindle. For example, if the heat treatment is not done well, the fatigue resistance of the spindle will be reduced. If the diameter of the spindle is too small, the phenomenon of 'over iron' will appear. Will cause the spindle to break. Another point is determined by the unique working characteristics of the cone crusher, because the main shaft is subject to frequent mechanical shocks and is more prone to fatigue damage.
2, problems in the feeding process
First of all, if the feeding is not performed according to the specified feeding amount, once it is too much, it will cause the equipment to overload, and for a long time, it will cause damage to the spindle. Secondly, during the feeding process, some hard materials, such as some special metal materials, are often doped. At this time, the normal operation of the spindle will be affected, and the product size will be too coarse and other components will be damaged.
3. Caused by overload operation and no regular maintenance
Overload operation reduces the spring force of the spring, which causes the product to be too coarse and also causes each component to wear easily. In the long run, the spring recovery ability will be weakened, and the material will accumulate and cause damage to the spindle.

Precaution
1. To improve the production quality of the spindle, strictly follow some specifications during the production process.
2. Periodic maintenance, maintenance personnel should perform the correct method to prevent equipment failure.
3. In the feeding process, it is necessary to reduce metal impurities and hard stones as much as possible.
4. Strengthen the training of the operators in each section, improve the operating level of the operators, strengthen the maintenance of the equipment, and ensure that the equipment is in good condition by timely and large-scale repair.