Why is the cutting blade of your cutting machine easy to break? First, check the cutting machine for any problems. The other is to change the low price disc for metal if this problem occurs. The solution is either to get the plane off work or to take repairs. If the cutting machine is good, you may consider the operational problems when cutting the material. When cutting materials, you can't feed too fast, and you can't cut more than one material at a time. If you still have this problem, it is that you have a problem with the cutting piece, the quality is not good, the bonding agent is too small, and the centrifugal force generated at high speed during work causes the cutting piece to break. This is a quality problem of the cutting piece itself, and it is recommended to use a high quality cutting piece. There are also good and bad cut pieces, the bad piece is not soft and strange, 4 to 5 yuan can also be cut, but the sand is not the price.
How to use the cutting blade cutting machine:
1. The cutting blade cutting machine should be placed on a stable ground, away from flammable materials, and the power cord should be connected to the leakage protection device.
2. The cutting piece of the cutting piece should be installed as required, and the test start operation should be stable before starting work.
3. The clamping device should be safe and reliable to prevent accidents caused by loose workpieces.
4. When cutting, the operator should evenly cut and avoid the front side of the cutting piece to prevent accidents caused by improper operation of the cutting piece.
5. After the work is finished, wipe the surface of the cutting blade cutting machine and clean the workplace. The open storage should be protected from rain.
Precautions:
1. The operation box or switch must be intact and must have grounding protection.
2. When the handle is used for cutting movement, the force should be even and stable. Do not use excessive force to avoid overloading the cutting piece of the cutting piece.
3. Check the clamping device of the cutting blade cutting machine should be flexible and reliable, and the hand wheel, screw, nut, etc. should be intact.
4. The cutting blade cutter lever should have sufficient strength and rigidity to keep the cutting blade free to lift after loading all the parts.
5. The lever shaft should be intact, the rotation is flexible and reliable, and the nut is locked after the lever assembly.
6. When replacing the cutting blade cutting piece, the power must be turned off. Newly installed cutting blades are required to meet the equipment requirements.
7. After replacing the cutting piece of the cutting piece, it is necessary to test whether there is obvious vibration, and it can be used after confirming that the operation is normal.
8. Use the cutting blade cutting machine to avoid the rotation of the cutting blade as far as possible to avoid accidental injury to others.
9. The support wheel should be complete and intact, the installation is firm and the rotation is flexible. It should be balanced and reliable during resettlement, and there should be no obvious vibration during work.
10. The shield of the transmission and the China cutting disc for metal must be safe and reliable, and can block the debris that flies out after the cutting piece is broken. The end baffle should be securely mounted on the cover and must not be removed during operation.
11. After the operation is finished, the power should be cut off immediately and arranged.