China cut off disc
is a kind of electric tool that is commonly used in our daily life. It can cut the metal flat tube and angle iron. Because the grinding wheel of the cutting disc is brittle and the rotation speed is high, there is a certain danger in use. Therefore, it is necessary to master some knowledge of the correct use of cutting discs in order to better serve the cutting discs.
Use of cutting discs:
1. The cutting disc should be placed on stable ground, away from flammable materials, and the power cord should be connected to the leakage protection device.
Second, the cutting disc should be installed as required, and the test start operation should be stable before starting work.
Third, the clamping device should be safe and reliable to prevent accidents caused by loose workpieces.
4. When cutting, the operator should evenly cut and avoid the front side of the cutting piece to prevent accidents caused by improper operation of the cutting piece.
5. After the work is finished, the surface dust of the grinding wheel cutting machine should be wiped and the workplace should be cleaned. The open storage should be protected from rain.
Before using the cutting disc, carefully check whether the power cord, switch, motor, protective cover, clamp, belt, etc. are intact, whether the screws of each part are loose, whether the grinding wheel has cracks, whether the metal casing and the power cord are leaking. If the problem is found to be repaired or replaced in time, it can be used.